CE vs SASO vs GOST: Which is the Right Bathroom Fixtures Certification Export For You?

Resposta rápida 

Choosing the right bathroom fixtures certification export strategy depends on your specific target country or clients. Europe does require CE compliance, Saudi Arabia enforces SASO standards, while Russia adheres to GOST regulations. Nonetheless, Interhasa bathroom fixtures fully comply with international safety and quality standards. 

This article explains technical certification paths to prevent customs rejections and lower compliance costs. 

CE vs SASO vs GOST: Which Certification Does Your Bathroom Fixture Export Market Require?

Bathroom fixture manufacturers need to make sure that they apply the right certification depending on the export destination. Products to be exported to the European Union should have the CE certification, while those intended for Saudi Arabia should be certified by the SASO. Products meant for Russia and CIS countries require the GOST certification.

Applying the right certification in the early stage can help avoid unnecessary delays at customs, rejection of the goods, and additional tests. One needs to determine the necessary regulatory requirements of the country of destination before shipping any bathroom fixture.

Which Plumbing Fixtures Apply To CE, SASO, and GOST-R Markets? 

Every region has its own parameters of compliance for water-related materials—such as CE for Europe, SASO for Saudi Arabia, and GOST-R for Russia and CIS. Plumbing exports have to meet regional requirements of hydraulics, materials, and pressure. Moreover, physical strength and chemical resistance need to be checked by importers before transportation.

SASO Approximate Cost and Lead Time 

Certification fees for SASO range between $1,500 and $3,000 depending on the product category. The certification process usually takes between 12 to 16 weeks. 

Importers have to get products registered using the SABER online website. Testing should be conducted using SASO 2655 standard for water flow rates, and factory inspections are compulsory for Type 5 certification procedures.

GOST-R Requirement 

GOST 25809-96 certification is required in Russia and CIS countries to ensure mechanical durability. Additional national labels regarding the water efficiency of plumbing devices are needed as well. 

These mentioned tests are carried out to determine how the device will perform at maximum pressure changes and at low temperatures. Moreover, certificates must be registered in the Federal Accreditation Service.

Which Electrical Product Certifications Apply To Bathroom Fixtures? 

Bathroom fixtures like smart sensor faucets, touchless soap dispensers, and hand dryers include powered components. These electrical products, therefore, must meet the requirements of safety, electromagnetic compatibility (EMC), and low-voltage directive (LVD) compliance. Official tests help to avoid short circuiting and power leakage in humid conditions.

For CE certification bathroom fixtures, LVD 2014/35/EU and EMC Directive 2014/30/EU testings are required. Test certificates from the International CB Scheme are issued according to IEC 60335 standards. CB test certificates facilitate national adaptations for SAA in Australia and PSE in Japan.

Quick Reference Table by Target Market 

Use this quick reference table below to help you evaluate certification requirements by region: 

Why Should New Exporters Start with 304 Stainless Steel and CE Certification? 

The new exporters will have easier access to markets when combining 304 stainless steel and CE compliance because there will be reduced testing costs and shorter logistics time frames. 

• Stability of Material: 304 grade stainless steel is resistant to corrosion, pressure stress, and chemical decay.

• Testing Effort Reduced: CE testing relies on the declaration of technical files supported by laboratory test reports.

• Worldwide Approval: Several non-EU countries recognize CE testing criteria for customs clearance.

• Economical Testing: CE testing eliminates the costly factory inspections at the beginning that type 5 schemes require.

Secador de mãos Interhasa SS Steel 90001

Crafted with anti-corrosion 304 stainless steel and fully CE, RoHS, and EMC compliant for seamless global export clearance.

Explorar produto

How Interhasa Handles Multi-Market Certification? 

Interhasa operates a 14,000 m² manufacturing plant based in Wenzhou, China. Our core expertise is the Research & Development, manufacturing, and global exporting of commercial bathroom fixtures to more than 60 countries.

We maintain strict quality control systems to ensure compliance in exports. Our products comply with the certifications of CE, RoHS, EMC, and LVD. Moreover, Interhasa helps OEM and ODM customers with CB Scheme test reports for faster registrations.

Our exporting destinations include the Middle East, Southeast Asia, Europe, and South America. While the type of clients we serve are importers, distributors, project contractors, and washroom brands. Explore our products or reach out directly through our contact portal.

Perguntas Frequentes (FAQs)  

What is SASO certification? 

• A SASO Certificate, also referred to as Certificate of Conformity (CoC), is an obligatory document from the Saudi Standards, Metrology and Quality Organisation (Saudi SASO). This confirms that your goods comply with the quality and safety requirements of Saudi Arabia. This is needed for customs clearance and legal trading of goods in Saudi Arabia.

What is CE accreditation? 

• A CE approved product (or more precisely a product that has a CE mark) is one that complies with the health, safety, and environmental protection requirements that are necessary for its marketing in the European Economic Area. CE stands for Conformité Européenne in French.

How long is a CE certificate valid? 

• The validity of a CE certificate, issued from an official third-party, is generally 3 to 5 years. But, self-certification has no expiry period. The validity is highly dependent upon the nature of your product and testing process.