Interhasa Square Tissue Dispenser E6012
Interhasa model 6012 tissue box,easy to open and close, two color deisng, clear visual for paper residence check , flat top can hold phone or key etc , anti-water splash, heavy duty capacity.
Explore ProductMeet Us at 140th Canton Fair! Phase 1 Booth:3.1M31 I Phase 2 Booth:10.1 I33-34
Compatibility depends on seven points: refill format, sheet or fold size, roll width and core, feed path, capacity, loading access and a sample test. A refill labeled “universal” can still jam if one dimension is wrong. Treat the dispenser and refill as one system. Interhasa makes folded-towel and jumbo-roll dispensers and can check your refill sample against the exact model before production.
Most refill failures start at quotation, not when the first case arrives.
Compatibility is the fit between the refill, the opening, the feed path and the user’s pull. The refill must sit in the housing, pass through the outlet, separate cleanly and leave the next sheet within reach. Two folded stacks can share a sheet length but differ in fold height; two rolls can share an outer diameter but differ in core size. Those differences decide whether the unit feeds or jams.
“Universal” usually means the refill fits a group of common dispensers, not every unit on the market. The label can ignore fold height, stack width, core size, outlet shape and cabinet depth. Once combined, those differences make the refill sit too high, lean to one side or drag. Paper then tears, pulls out in a clump or falls back inside.
Ask which refills were tested and how they behave at the end of a pack. The guide to paper towel types helps you describe the refill accurately, so nobody compares a folded towel with a roll.
Folded, roll and toilet paper are different families. A folded towel loads as a stack; a roll turns on a spindle. Choose the format first, then compare models inside it. The dispenser types guide explains the configurations. Name the refill family in your quote request.
Measure the full stack, not one sheet: sheet length, width, fold height and stack depth. Fold height controls how the paper sits in the cabinet; if the stack is too tall, the lid presses on it or the top sheet fails to separate. Ply and paper weight also change stack height and pull force. The paper towel size guide covers common sizes. Check the refill against the target model with a ruler and a sample.
Record roll width, outer diameter and core diameter. The core is the hole through the center, not the outside of the paper. A roll can look right and still have a core too small or too large for the spindle.
The E51018 jumbo roll dispenser shows why. Its page lists a width below 9.5, a core above 7.5, a roll diameter below 24 cm and capacity to 10 kg. The page does not state the unit for width and core, so confirm millimetres before approving a roll. Test the start, middle and end, because feed changes as the roll shrinks.

The feed path runs from pack or roll to outlet, through rollers, guides, bends and the opening. A smooth path reduces drag; a sharp bend, narrow slot or rough edge raises tension and causes tears.
With the refill installed, check whether the first sheet starts cleanly, the paper stays centered, and the next sheet can be reached without opening the cabinet. The E6002 square tissue dispenser lists ABS construction, a 298 × 130 × 95 mm size, a bent outlet, a chrome bar and press-or-key unlocking. The refill still has to match the outlet and stack area.
Capacity is a service decision, not a number to maximize. A busy restaurant may need a larger pack or jumbo roll; a small office may prefer a compact unit. Estimate peak visits, then add time to open the unit, swap the refill and check the outlet. The roll versus folded comparison weighs capacity against service and storage.
A lock reduces tampering, but a missing key leaves the dispenser empty. A window helps only if the refill sits where staff can see it.
The E6012 square tissue dispenser lists ABS construction, a 275 × 205 × 96 mm size, easy opening, a clear paper-level window, a flat top and page-stated anti-water-splash and heavy-duty capacity claims. Ask who controls the key, whether spare keys are available and how long a reload takes. Features apply to that model, not every unit in the range.
Test the complete system with the refill you intend to buy. Use the same paper, loading method and pull motion for every candidate, and keep an existing dispenser as a baseline.
Start with a full refill and record loading time. Ask at least three people to use it normally. Test the beginning, middle and end of the pack, because tension changes as paper is used. Include wet hands and a realistic pull; a gentle dry test can hide tearing and double sheets.
Record attempts, successful pulls, jams, tears, double sheets, paper left at the end, loading time and wear. Jam rate is jams ÷ dispense attempts × 100. Four jams in 200 pulls is 2 percent, but the number only helps when you also record the paper, model and conditions.

Refill lock-in means the dispenser accepts only one refill size, source or design. You can still get good service, but you cannot compare prices or change paper partners without replacing hardware. It can come from a unique core, proprietary outlet, special fold or cabinet depth.
Annual refill cost is refills per year × landed cost per refill. Add labor, storage, jam cleanup and stockout risk. If two refills are approved, compare all-in costs over the same period with equivalent pack counts.
For example, 24 cases a month at $28 is $8,064 a year; a second approved refill at $26 is $7,488, a difference of $576. That only matters if it passes the sample test and needs no new dispensers.
The table is a starting point, not a list of every refill each model accepts. Confirm dimensions and request a sample before ordering.
| Model | Page-stated format and facts | Buyer check |
|---|---|---|
| E6002 square tissue dispenser | ABS; 298 × 130 × 95 mm; bent outlet; press or key unlock; chrome decoration bar | Compact folded refill; confirm stack height, sheet width and outlet clearance. |
| E6012 square tissue dispenser | ABS; 275 × 205 × 96 mm; easy open and close; clear paper-level window; flat top; page-stated anti-water-splash and heavy-duty capacity claims | Folded refill where staff need a visible paper level; verify stack and loading access. |
| E6019 large-capacity square tissue dispenser | ABS; page states Z/V fold tissue | Fold-specific example; confirm whether your refill is Z-fold, V-fold or another format. |
| E51018 jumbo roll dispenser | ABS; 265 × 270 × 130 mm; page lists width below 9.5, core above 7.5 and roll diameter below 24 cm, with capacity to 10 kg; width/core units not stated | Roll refill; confirm millimetres, core fit and roll diameter with a sample. |
Interhasa makes paper towel dispensers in-house and holds CE marking and RoHS documentation for them. It also makes hand dryers, soap dispensers, faucets, wall-mounted hair dryers and baby changing stations, which helps distributors consolidate a washroom order. Standard orders carry no general MOQ; custom packaging has its own minimum. Orders above USD 8,000 qualify for free FOB Ningbo, and lead time is set by the confirmed order. Ask for the drawing, compatibility sheet, certificates and quotation in writing.
Send a physical refill sample when possible. A drawing cannot show how paper separates at the end of a pack. The paper dispenser category helps you shortlist a format before the sample stage.
Interhasa model 6012 tissue box,easy to open and close, two color deisng, clear visual for paper residence check , flat top can hold phone or key etc , anti-water splash, heavy duty capacity.
Explore Product
No. Fold height, stack width, stack depth, sheet length and outlet all affect fit. Test a full pack.
No. A jumbo roll may reduce refill frequency but adds storage, handling and service time. Compare landed cost, labor and service visits.
There is no universal number. Test a full pack with several users, cover beginning, middle and end, and record jams, tears and double sheets.
Do not assume so. The two formats use different internal paths and outlets. Ask for the compatibility list and test the intended refill.
Compatibility comes down to seven checks: format, sheet or fold size, roll dimensions, feed path, capacity, loading access and a sample test. Measure your refill, test a full pack and ask for evidence.
Interhasa’s range includes compact folded-towel units, large-capacity square dispensers and a jumbo roll model. Send your refill sample, dimensions, target model, estimated order value and packaging needs so the team can confirm the format, MOQ, FOB Ningbo terms and lead time. A short review before production costs less than a jam after the cartons arrive.



