زورونا في معرض كانتون الـ 139! المرحلة الأولى، الجناح: 3.1L38 | المرحلة الثانية، الجناح: 10.1i33-34
Choosing between a recessed hand dryer and a surface-mounted model impacts facility safety, wall space, and installation budgets.
For tight spaces and modern layouts, a hand dryer recess kit delivers a flush finish that satisfies strict ADA hallway clearance rules. For faster retrofits and lower labor costs, surface-mounted hand dryers attach directly to existing drywall without cavity construction.
انترهسا manufactures both options with OEM customization capabilities to fit any wall depth. This guide compares both mounting types to help facility managers select the right layout for commercial restrooms.
A recessed hand dryer installation allows the hand dryer to be mounted in a cavity cut into the wall. This provides a flush installation against the wall surface. It minimizes obstruction to high-traffic walkways and gives a sleek and modern appearance.
For the recessed system, you will need a minimum cavity of 4 inches deep. The standard stud wall 2×4 is sufficient for most compact units. Thin partitions will require back-to-back reinforced panels.
The recess hand dryer kit is made up of a quality stainless steel trash can or rough-in box. Other components include mounting flanges, dripless splash trays, and electrical conduits. Interhasa makes customizable OEM frames to fit for non-standard cavity dimensions.
Interhasa 1688 classic model double side air outlet high speed 1800W hand dryer, with light indicator, 4 infrared sensor, on/off switch, hot/cold switch, multy color available to match your deco design, accept for OEM order or brand distributor.
استكشاف المنتج
Surface-mounted installation entails fastening the dryer cabinet directly to the walls already built. In this process, technicians secure the frame on wall studs or masonry structures with heavy-duty screws.
The installation also does not entail making any structural changes to the walls or interior boxes. Electricians feed the conduits through surface raceways or rear wall knockout areas. This entire setup speeds up replacement projects significantly.
مجفف الأيدي الكلاسيكي من Interhasa مصنوع من مادة الفولاذ المقاوم للصدأ، مجفف عالي السرعة يجفف يديك في 5 ثوانٍ، فرشاة أو فولاذ مقاوم للصدأ لامع متاح للاختيار
استكشاف المنتج
Surface-mounted fixtures are cheaper and easier to install. The installation of recessed fixtures is more expensive, as well as requires additional framing of the walls.
| Expense Category | Surface-Mounted Dryer | Recessed Hand Dryer |
| Initial Unit Cost | Lower Base Cost | Higher Base Cost |
| Wall Preparation | Zero Framing Required | Structural Wall Cutting Needed |
| Labor Hours | 1 to 2 Hours | 3 to 5 Hours |
| Overall Budget | Economical | Premium Investment |
Facility managers can explore detailed spec sheets on the Interhasa Hand Dryer Collection to evaluate electrical parameters and housing dimensions before installation.
Mounting is based on the amount of traffic to the site, physical space available, and how the building is structured.
High-use areas need efficient management of traffic. The use of the ADA recessed hand dryers helps reduce accidents in crowded and narrow corridors. In one recent upgrade of a regional transport facility, changing to flush wall mounting lowered incidents of accidental impacts by 40 percent.
Older buildings have solid concrete walls or existing pipes inside cavities. With surface mounting, there is no need for expensive structural modifications. This then keeps a low budget for wall modifications.
Under the Americans with Disabilities Act (ADA Protrusion Limits), wall projections within circulation paths are restricted. Items that are mounted at a height ranging from 27 inches up to 80 inches are not allowed to protrude more than 4 inches into the corridors.
باعتبارنا شركة مصنعة معتمدة، فإننا نقدم أسعارًا تنافسية بالجملة وحلولًا مخصصة لعلامتك التجارية.
