Meet Us at 140th Canton Fair! Phase 1 Booth:3.1M31 I Phase 2 Booth:10.1 I33-34

×

Paper Towel Dispenser Supplier Quotes: 9 Specs Buyers Should Compare

November 15, 2026

White wall-mounted paper towel dispenser with a towel hanging out, beside a sink area and navy text reading Paper Towel Dispenser Quotes, 9 Buyer Checks.

Quick Answer: Start with the refill, then compare nine specs: paper format and dimensions, usable capacity, housing and finish, lock and loading access, compatibility evidence, mounting, spare parts, order terms and documents. Ask every supplier to answer the same items in writing on one quote sheet. A low unit price only means something when capacity basis, refill source, packaging, trade term and spare-part support are comparable. Interhasa manufactures paper towel dispensers in-house and can quote its folded and large-capacity models once you define the refill and order.

A quote can look complete while leaving the refill behind the capacity claim, the holder of the key and the carton size unanswered. This guide gives importers and distributors a nine-item RFQ checklist for commercial paper towel dispensers, plus a sample test to run before production.

Start with One RFQ Sheet for Every Supplier

A useful RFQ makes two suppliers answer the same questions. Send your refill details, then ask each to complete the nine-row table below. Ask for the current drawing, written quote and tested refill basis rather than a catalog page.

#Spec to compareWhat to ask for in writingWhy it changes the decision
1Paper format and refill dimensionsFold type, sheet size, stack height, roll width, core and outside diameterRefill assumptions differ
2Usable capacityStated capacity, refill basis and internal cavity dimensionsCounts are not comparable
3Housing, finish and wall fixingsMaterial, finish, color, fixing kit and mounting patternAffects cleaning and installation
4Lock and loading accessLock type, key control, door swing, hinge side and paper windowAffects service and security
5Refill compatibility evidenceTested refill list, loading orientation and sample resultPrevents jams after arrival
6Mounting and installationWall type, hole template, anchors and clearanceRetrofits often fail at the wall
7Spare parts and servicePart numbers, prices, pack quantity and ordering routeSmall parts drive uptime and cost
8Order termsMOQ, packaging MOQ, carton, labeling, Incoterm and portLanded cost exceeds unit price
9DocumentsDrawing revision, datasheet, CE/RoHS files for the exact model, warranty termsTender approval needs traceable paperwork

Mark any blank row unconfirmed and ask again.

Specify the Refill Format and Usable Capacity

Name the refill family before the dispenser. Folded hand towels and roll towels use different internal paths, outlets and loading methods. A folded unit holds a stack; a roll unit turns on a spindle or core.

For folded towels, record sheet length, width, fold height and full stack depth. Fold height affects how the stack sits inside the cabinet. For rolls, record roll width, outside diameter and core diameter. A small core can stop the roll turning; a large core can feed unevenly. The roll versus folded comparison explains the service trade-offs.

Der Interhasa E6002 square tissue dispenser lists a bent outlet, chrome decoration bar, press-or-key unlocking, ABS material and 298 × 130 × 95 mm. These specifications do not prove refill fit, so confirm them against the drawing or a sample.

Capacity is not one number you can compare across suppliers. A count such as “400 towels” belongs to a named refill, loading arrangement and test method. Change the fold, paper weight or stack height and the usable count can change. A larger cabinet may hold less if the refill sits badly. Ask whether the quoted count is based on a full pack or a compressed test load.

Estimate refill frequency from traffic, not the brochure. Count peak visits, estimate towels per visit and add margin for double pulls and waste. If the refill cannot be bought locally, the capacity advantage may disappear.

Der E6019 large-capacity square dispenser is listed for Z-fold or V-fold tissue with an ABS housing, but its product page does not state a capacity figure. Ask for the drawing, cavity dimensions and tested refill basis. The paper dispenser category shows the available formats; fit still needs a model-level check.

Check Housing, Finish and Lock at the Wear Points

The housing affects weight, cleaning and how the unit feels in use. ABS is a molded plastic used in many commercial dispensers; stainless steel brings different weight, finish and repair considerations. Neither is automatically better for every site. Ask what the housing is made of, how the finish is specified and which cleaners staff will use.

Look at parts that take repeated force: hinge, door catch, lock and outlet lip. A thick cabinet can still fail at a thin latch. Ask for the material and replacement part number for each point.

A key lock controls access, but someone must hold and replace the key. A press-to-open latch is faster for staff and easier for the public. The E6002 listing states press-or-key unlocking; confirm the ordered variant. Also ask about door swing, hinge side and whether a window shows the real stack.

Wall fixings are part of durability. State whether the wall is concrete, masonry, tile over board or drywall, then ask for the hole pattern, template and fixing kit. For retrofits, check that the new pattern covers the old holes or plan to patch the wall.

Prove Refill Compatibility with a Sample Test

Three-step sample testing graphic for folded paper towels: load the refill, test through the dispenser pack, and record jams and tears on a checklist.

Test the refill you will actually buy. Send a full pack or roll, or ask for a sample dispenser loaded with your refill. Use it through the beginning, middle and end of the pack, and record jams, tears, double sheets and paper left in the housing.

Ask the supplier to confirm in writing the refill SKU or dimensions tested, the loading orientation, the model and variant used, and the result. “Fits standard towels” is not a test. A tested list is stronger, but it still must match the paper you can source.

If your refill source may change, require a separate check; two packs with the same fold name are not automatically interchangeable. The paper towel type guide helps you describe the refill.

Require Spare Parts, Order Terms and Documents in Writing

Spare parts. Ask for a list with part numbers and prices covering the lock and key, hinge, door catch, outlet lip, mounting kit and any spring or tension part used by the feed. For each, ask for pack quantity and the ordering route.

Ask who diagnoses faults and who pays for parts and freight. The warranty statement should name covered components and the period for the exact model, not a general line. A distributor may also want a startup kit so one failed latch does not sideline a dispenser; price it separately.

Order terms. Interhasa confirms that standard orders carry no general MOQ, while custom packaging has its own MOQ. Ask for both numbers and which packaging element triggers the custom minimum: printed carton, logo, label, insert or new color.

Orders above USD 8,000 qualify for free FOB Ningbo. The quote should still name the Incoterms version, port, loading responsibility and origin charges. Convert FOB, CIF and EXW offers to the same delivery point before judging price. Lead time is set by the confirmed order; ask for the schedule after sample approval, artwork approval and deposit, and include carton dimensions, pallet plan and shipping marks in the review.

Documents. Ask for the model drawing and datasheet revision that match the quoted variant, showing overall dimensions, mounting points, refill format, material, finish and options. For paper towel dispensers, Interhasa holds CE and RoHS documentation. Ask for the files that apply to the exact model and target market, and check the certificate number, holder, standard and validity; a certificate for another product family is not proof for a dispenser. Include packaging artwork, the warranty statement and the approved sample record with the purchase order.

Normalize Both Quotes into a Landed-Cost Sheet

Infographic titled Compare the Same Terms showing Supplier A and Supplier B quotes joined by arrows to a middle panel listing Refill, Packaging, Freight and Spare parts, with a handshake below.

Normalize both quotes before comparing totals. Use the same refill, capacity basis, packaging, trade term and spare-parts kit. Remove any line that only one supplier includes, then add it back as a separate cost.

Build a landed-cost sheet: unit price, packaging, freight, duty, spare parts, fixings and expected service labor. Add sample and approval cost. If a supplier cannot document compatibility, add the risk of jams and returns rather than assuming zero. Ask both suppliers for the same Incoterm and quote validity, since a price that expires in seven days is not equivalent to one held for thirty.

Consider the wider washroom order. Interhasa also manufactures commercial soap dispensers, Händetrockner, faucets, wall-mounted hair dryers and baby changing stations. Consolidation can reduce supplier management, but each model still needs its own check. The company profile explains production scope, not model terms.

Interhasa Quadratischer Taschentuchspender E6002

Interhasa 6002 tissue box, a bend tissue outlet , make the tissue box match your usage habbit ,with chrome decoration bar to make the tissue box luxury feeling. Press or key two unlock way, make you convienient in usage.

Produkt entdecken
Interhasa Quadratischer Taschentuchspender E6002

Häufig gestellte Fragen

Is the lowest unit price the best deal?

No. A lower price can hide smaller usable capacity, a hard-to-source refill, a weak spare-parts route or a costly carton. Compare landed cost and service, not only hardware price.

Can I use my current refill in a new dispenser?

Only after a dimensional check and sample test. Fold height, stack depth, core, outlet shape and feed path all affect fit. “Universal” is a label, not a result. Send the refill or its dimensions before approving the model.

Do standard orders have a minimum order quantity?

Interhasa confirms that standard orders have no general MOQ. Custom packaging has its own MOQ, depending on the change. Ask for the applicable minimum in the written quote.

What should I send with my first RFQ?

Send the refill type and dimensions, a sample if possible, the target model or existing unit, wall type, peak traffic, packaging needs, estimated order value and required market documents.

Das Fazit

A quote is only comparable when it answers the same nine specs: format and refill size, capacity, housing and finish, lock and access, compatibility evidence, mounting, spare parts, order terms and documents. Start with your refill, test a sample and put assumptions in writing.

Interhasa manufactures paper towel dispensers in-house and offers folded and large-capacity models. Send your refill sample, target model, packaging needs and estimated order value through the Kontaktseite. The team can confirm the applicable MOQ, FOB Ningbo qualification and the lead time for the confirmed order.

Ein Angebot einholen
Suchen
Arbeiten Sie mit den Experten für Händetrockner zusammen.

Als zertifizierter Hersteller bieten wir wettbewerbsfähige Preise für Großabnehmer und maßgeschneiderte Lösungen für Ihre Marke.